The Job

About the Install

Client Requirements
The automation equipment used for both gate models were supplied by BFT.
There are two entrances to this property, one that had sufficient space for swing gates and one tighter entrance which required a sliding gate. They were looking for a semi open design for both entrances to ensure the entrance wasn’t too enclosed and imposing.
For the gates, we supplied two bespoke Horizal Aluminium gates in the exact colour match the customer specified. For the swing gates we installed the ROSCANA model and for the sliding gate we installed the SERAM model.
The client also requested a video and audio intercom on both entrances which can be answered from inside of the house. Due to the poor signal in the area we did not recommend a GSM intercom and the functionality would have been limited. This was also not needed as nobody would be entering the property without fob or coded access.
Project Overview Video
This video project was completed with the assistance of Justin at Green Lemon.
Read More from Us:
Case Study: Hale Automated Driveway Gates
The automation equipment used for both gate models were supplied by BFT. There are two entrances to [...]
Case Study: Hubbell Commercial Gates & Roadblockers
B3/S2 Security-Rated Perimeter Fencing: An LPCB-tested fencing system designed to resist attacks for approximately three minutes, providing [...]
Case Study: The University of Liverpool
Specification - The University of Liverpool - Wyncote Sports Ground Country Gates & Barriers were contacted by The University of [...]